Follow-Ups/Recalls (hereafter referred to as Recalls) are very useful for ensuring your repeat business does not slip through the cracks. However, it can be difficult to fully set up to get the most out of them. This article will delve into how to set up MacPractice to do the heavy lifting for you, and how to adjust your workflow to ensure Recalls work for you.

If you prefer a video format, please refer to Recalls & Follow Ups Series for the beginning of a video series of how to use Recalls/Follow-Ups.

Setting Up Follow-Up/Recall Types

First, we will need to set up the Follow-Up/Recall Types your office will need. Navigate to References > Follow-Ups if you are using MacPractice DC, MD, or 20/20. Navigate to References > Recalls if you are using MacPractice DDS.

Open

To add a new Recall Type, simply click the Green Plus at the top of the Sidebar. This will add a new Recall. You can name the Recall what you like, and you can set the Frequency in Days. For example, if you want to create a Six Month Recall, you would set a Frequency of Days of 180-186 days (30 or 31 * 6).

You can add as many Recall Types as you like, and we strongly recommend you add as many as you need to cover all of your variations of how you typically handle Recall Types.
If you need to remove a Recall Type, simply select the Recall Type and click the Red Minus in the Sidebar.f

Tying Follow-Up/Recall Types to Procedures (Optional)

Next, we will want to decide whether we want to tie these freshly created Recall Types to Procedures within your Fee Schedule. This will have the impact of adding the tied Recall Type to a patient every time a tied procedure is posted to that patient's ledger. If you consistently use the same Recall Type for each patient with a particular procedure, you will want to tie it. If not, you will want to skip this step and move on.

Navigate to References > Fee Schedules, selected the desired Fee Schedule, and then you can search for the Procedure you wish to tie to a Recall Type. The Follow-Up/Recall Type drop down is right below the Short Description field. Select the Recall Type you wish to tie, and then save the record by pressing Command-S. Alternatively, you can save the record by using the Edit Menu > Save Record.
Repeat these steps for any other procedures that you wish to tie.

Open

Adding a Recall to a Patient's Record

There are two ways you can add a recall to a patient.

Posting a New Charge with a Recall Type

When posting a new charge in a patient's ledger, there is a drop down for Recall Type.

Open

If you have a procedure selected that you have previously tied to a Recall Type in References > Fee Schedule, the Recall Type drop down will automatically default to that selected Recall Type. Otherwise, you can simply select the desired Recall Type here.

When you save the Charge, the Recall will be added to the Patient. You can verify this by navigating to the Patient Ability > Patient Tab > Follow-Ups or Recalls.
If "Schedule a Follow-up Appointment After Charge" is checked in Preferences > Ledger > General, when the charge is posted, you will see this prompt:

Open

By clicking the Schedule button, this will automatically create an appointment on the schedule for this patient on the indicated day. If you do not wish to schedule Follow-Up/Recall appointments immediately, we recommend you turn off the Schedule a Follow-Up Appointment After Charge" preference.

Adding a Recall in the Patient Tab

Alternatively, if you wish to take a hands-on approach to adding a Recall or Follow-Up to a Patient record, you can simply navigate to the Patients Ability > Patients Tab > Recalls or Follow-Ups and add it from there by clicking on the Green Plus highlighted in the screenshot below.

Open

From here, you can also edit the Recall added to this Patient.
The Recall Date is calculated by taking the Last Visit Date (which defaults to the date the Recall was created), and adding the Frequency (in days) to the Last Visit.
If there is an Appointment tied to this Recall, the Recall would be highlighted in Green. If the tied appointment is prior to the Recall Date, the Recall will be highlighted in Red. This is important to watch for, in case you are using Recalls to take into account the patient's insurance and whether their insurance only allows procedures a certain number of times a year.

Adding a Recall from an EMR/EDR Form

You can also configure an EMR/EDR Form Section to add a Recall via a Pop-Up Button.

To do so, navigate to the EMR/EDR Ability and either create a new Form Section, or open a pre-existing form section. From there, add in a pop-up field from the Form Elements section in the Form Section Palette by dragging and dropping it into your Form Section.

Open

Select the pop-up menu you just dragged into the Form Section. In the Form Section Palette underneath the Popup Button Inspector, click the Options Tab. In the Reference pop-up menu, select "Recalls". This will display a list of your Recall Types.

Make sure to check "Apply to Patient". This will ensure any template with this form section will add any selected Recall Type to the Patient's record.

Open

Tying Appointments to Recalls

The appointments listed under the Recall or Follow Up node of the Schedule sidebar displays patients in black, blue, or green text. Each of these colors communicates 

• If the name appears in green text, it indicates the patient has a Recall or Follow Up and is linked (tied) to an appointment on the schedule.

• If the name appears in black text, it indicates the patient has a Recall or Follow Up created from a charge but the Recall or Follow Up either has not been scheduled, or is not associated to an appointment.

• If the name appears in blue text, it indicates that the patient has a Recall or Follow Up that is tied to an appointment that has been flagged as missed/cancelled.

You can easily tie any appointment to a Follow-Up/Recall by right clicking the appointment in question and select Set Recall. (Note: In Build 9.6+, this has been renamed to "Tie Recall".) This menu will list every Recall available on the Patient's account.

Open

If you are scheduling an appointment, you can have it tie to a Recall by selecting the Recall in the Sidebar, and then create the appointment. The created appointment will be tied to that Recall.

Open

Using the Follow-Ups/Recalls Report

Once you have a Recall added to a Patient's chart, you can then track those Recalls via the Recalls Report. You can find this report in the Reports Ability, under the Marketing category.

Open

This report can be filtered by Provider, Office, or Recall Type. This Report can be used a few ways. We will describe the typical way this Report can be run to identify Recalls that have no appointments associated with them, indicating accounts that could be followed up on to retain repeat business.

The settings in the above screenshot indicate how to run this report to capture Patients that have a Recall on their account, but do not have an appointment tied to that Recall.
We do this by following these steps.

1. Set the Report date filter (indicated by the drop down menu below the Provider Filter) to Recall Date.

2. Set the Recall Appointment to include Patients Without a Recall Appointment.

3. Set Recall to "With", indicating that the results will include Patients with a Recall on their Account.

4. Finally, we will set the Start Date and End Date to include the period we wish to search. For example, if I want to find all of my Patients that have a Recall Date in April of 2017, I will set the Start and End Dates to 04/01/2017 and 04/30/2017.

5. Click the Apply button.

Open

The results that generate in this report will include patients that have a Recall in their account, but no appointment tied to that Recall. Therefore, if you tie an appointment to an existing Recall, this report will not pull up that account, as they already have an appointment on your schedule that you can track and follow. You can also print off Recall Reminder Postcards, as described in the next section.

Generating Recall Reminder Postcards

From the Recalls Report, there is a button at the bottom labeled "Print Postcard(s)". This button, when clicked, will take the patients listed in the Report generated, and allow you to generate Recall Reminder Postcards.

Open

You can customize the message that appears as indicated in the screenshot above. These fields are relatively self explanatory. For example, if we generated a postcard with the above fields filled out, it would appear like this:

Open

For more information, please refer to Marketing Report - Follow-Up & Recall.

AutoRemind Recall Notifications

If you have AutoRemind active on your license and have the option enabled on AutoRemind's side, you can utilize The Follow Ups/Recalls report to send Recall or Follow-up reminders to patients. 
To send AutoRemind Recall Notifications, use the following process:

Open

Open

1. Add a Follow-up or Recall: Before AutoRemind Recall Notifications can be sent, enter a Recall or Follow-up in the patient's record. The Recall / Follow-up topic demonstrates how recalls work within MacPractice.

2. Set the Preferred Recall Method: After the patient has a recall or follow-up listed, set the Preferred Recall Method pop-up menu to the AutoRemind Notification Profile. You can set this for an Account by navigating to the Patients Ability > Patient Tab > Communication sub-tab. 

   Information on patient account setup for AutoRemind is available in Patient - Reminders.
   An important caveat for clients running MacPractice 11.17 and earlier:
   If you use a Communication Preference and a patient does not have the corresponding field set in the Patient Tab of the Patients Ability, it will cause an error to occur and interrupt sending a batch of Recall Reminders. The error will look like this:

   If you see this error, you can click the "Make List" button to generate a list into your Lists Window that will contain the patients who still need Recall Reminders sent to them. You can use that List to ensure each of your Patients has the desired Communication Method set in their Patient Tab. 
   Each Communication Preference corresponds accordingly:
   E-mail corresponds to the patient's Email Address field.
   Text / SMS Message will correspond with a Mobile Phone Number.
   Voice Message options will correspond to that type of Phone Number in the Patients Tab.

3. Send Recall Reminders: Use the Follow-up or Recall Report to send reminders to patients.
   Note: In order to Send Recalls, you must have a default postcard form set in Preferences > Forms.

   Run the report, then click the Send Recalls button. From the resulting window outlining the number of each recall type to be sent, enter a comment to be printed on the post cards if paper reminders are also sent. Click the OK button to generate the AutoRemind electronic messages and print any post cards. AutoRemind recommends running this report for a month date range at least twice per month. This will send an additional reminder to patients that have not yet scheduled an appointment.

   If you do not see the drop downs by "Emails", "SMS", "Voice" and "Postcards" at the top of this screenshot above, you may not have the AutoRemind Follow-Up/Recalls feature active. Please contact AutoRemind to discuss purchasing this option.

4. Schedule Recall appointments: When an appointment is scheduled, link the appointment to the Recall or Follow-up to ensure that the Recall or Follow-up Report will not generate duplicate reminders for patients that have scheduled an appointment.